Glass to Glass/Metal High Strength Construction Adhesive 50g plus free UV torch
Glass to Glass/Metal High Strength Construction Adhesive 50g plus UV curing torch
50g Kafuter Strong power UV Glue UV Curing Adhesive Transparent Crystal and Glass Adhesive for Acrylic metal glass
Kafuter Ultraviolet (UV) Curing Adhesive
Performance characteristics: fast curing speed, high bonding strength, low viscosity and permeability, easy to remove air bubbles when sizing, suitable for large-area bonding. It can be applied manually or mechanically, and has good yellowing resistance.
Product use: This product is suitable for bonding glass and glass, glass and metal, and can be used for bonding glass furniture, handicrafts, etc.
Product appearance: colorless or light yellow transparent liquid Viscosity (25℃ NDJ-1 viscometer, mPa.s): 500~1000 Curing time (S): 10~20 Shear strength (MPa): glass/stainless steel ≥10 glass broken
Usage: Before applying glue, the bonding surface must be dust-removed, oil-removed, and dried (organic solvent such as acetone must be used to remove the water film on the surface of the glass). After the glue is applied, close the bonding surface, press a little harder to make the glue layer evenly distributed and expel the bubbles, and irradiate it with a 60mw/cm2 high-pressure mercury lamp for 10-20s to cure. It will be better if it is irradiated with a high-power high-pressure mercury lamp for 3-5 seconds to position it, and then irradiated with a low-power high-pressure mercury lamp for about 5 minutes